C100

The ZK-C100 photovoltaic cleaning drone is specifically modified to cater to solutions for photovoltaic cleaning. Its fuselage, power system, flight control, and linkage devices all utilize a military-grade platform. It is equipped with a detachable cleaning system and imported cleaning kits, and supports secondary development. One remote controller can operate the drone and the cleaning system simultaneously.

This photovoltaic cleaning drone comes with a 55-liter water tank, a water flow rate of up to 16 liters per minute, a 13828 motor system, a 250A multi-directional cooling ESC, and a large 56-inch propeller employing patented wave-shaped variable cross-section technology, resulting in greater power. The entire drone frame is constructed from ultra-strong 7-series aluminum alloy, which is more robust and durable.

ZK-C100 photovoltaic cleaning drone with a built-in 3000W high-power cleaning pump capable of generating a focused jet of water at 19MPa, can effectively removing dirt. The nozzle spray angle is adjustable (0° to 45°) to adapt to different dirt conditions. The drone has an operating flight radius of up to 2000 meters, with an effective cleaning time of approximately 8 minutes per flight, making it perfectly for large-scale photovoltaic cleaning.

Key Specification

Model No.	ZK-C100	Battery	18S-30000mAh
Dimension	293x326x83cm (arms+ propellers unfolded) 168.519983cm (arms+propellers folded)	Battery charging time	10min-30min (depending on charging power)
Wheelbase	227cm	Wind resistance	6m/s
Weight	41kg (excluding battery)	Protection rating	IPX5
Rated payload	65kg	Max speed	13.8m/s (50km/h)
Water tank capacity	50L, maximum 55L	Max flight radius	2000m
Endurance	15min @ hovering; 8min @ cleaning operation	RTK positioning	Horizontal ±10cm, Vertical ±10cm
360° forward obstacle avoidance range		Distance: 1~30m; FOV: Horizontal 360°, Vertical ±25°
Rear obstacle avoidance range		Distance: 1~30m; FOV: Horizontal 55°, Vertical ±5
FPV image	focal length 1.45mm; Resolution 1920*1080	Ground station signal distance	4000m
Ground station endurance	built-in battery: 5.5 hours	Airborne cleaning pump power	3000W
Nozzle water pressure	19MPa@single nozzle; 9MPa@dual nozzles	Airborne cleaning pump flow rate	16L/min
Nozzle water jet pattern	0°; 15°; 25°; 45°	Single-flight spray width	0.5m-2m

Product Advantages

Military-grade platform (airframe/powertrain/flight control/linkage, etc.)

Imported cleaning kits, market-tested and certified.

Kit-level warranty (spraying/piping/valve pumps/controls, etc.)

Operational training and SOP (parameters/flight path/operational logic debugging).

SDK Development Functions:support secondary development.

Removable Cleaning System : it can be used as an Agras drone after take off the cleaning system, it also can be worked as a cleaning drone after the cleaning system is installed.

Max water tank capacity up to 55L,16L per minute.

It is recommended to buy 2 sets of the drone for improving working efficiency.

We provide 2 full days related operational training.

One remote control can control both the drone and the cleaning system simultaneously.